Make sure you are using a Telstra micro SIM card: Slide open the cover and Insert the micro-SIM. Press and slide the front cover and remove it. Insert your micro SIM as shown: 4. Optional, you can add a microSDHC card to use the device as portable USB storage. Replace the top cover. Modem Overview and LED Indicators.
This guide applies to AlliedWare Plusâ„¢ products that support USB Cellular Modems. USB Cellular Modems are supported from: 3G - version 5.4.5-2.3 Diagnostic tools - version 5.4.6-1 4G/LTE - version 5.4.7-0.2 IPv4/IPv6 dual stack support for USB modem interfaces - version 5.5.0-0.1 USB Cellular Modem
First connect the MX-Z appliance to the Meraki Cloud and make sure it comes up online. Test the USB modem to ensure it can connect to the Internet/provider. Connect the cellular modem and verify that the cellular modem WAN uplink comes online in dashboard.
Example Cellular Configuration ¶. Navigate to Interfaces > Assignments, PPPs tab. Click + to create a new entry. Configure the settings as follows: Link Type. PPP. Link Interface (s) Select the port for the modem from the list. The list contains all available serial ports on the firewall.
A 4G WiFi router, containing a built-in LTE broadband modem, uses a SIM card to share internet connections. You can use a 4G WiFi router for internet sharing anywhere, as long as it is within the network range of the network service provided by your mobile operator. A DSL modem router is a router with a built-in DSL modem.
Password manually option and enter the 3G/4G parameters provided by your internet service provider (ISP). 6. Follow the step-by-step instructions of the Quick Setup to complete the configuration. > Refer to Plug and Play via 3G/4G USB Modem to share the internet through a 3G/4G USB modem. > Refer to Connect to DSL/Cable/Satellite Modem to share the
.
4g usb modem setup
